Skip to main content

Cataleya Orchid One

xDR files​

In order to establish xDR files integration with JeraSoft Billing, make sure that SDR Generation Parameters are set per the screenshot below:

SDR Generation Parameters

Sample SDR record​

245,1,S,True,2,20,1,(GMT -8:00) Pacific Time (US & Canada),1,200,30001,141-91d-1434055010,,,1,4,INVITE,4.557,0,,,,,1,285,
Client-Bria,phone,,77,76589YjY5MDFiY2NlZmY4MjM2MmEyZTEyYjRhZGZmNzk2M2Q,4080000011,14083218679,4080000011,,sipif-10.2.3.24,
sip:10.2.3.24:5060;transport=UDP,sip:172.16.110.98:5066;transport=UDP,20150611133650116,20150611133650333,
20150611133650436,20150611133654993,1,145,regression2,regression2,,222,76589YjY5MDFiY2NlZmY4MjM2MmEyZTEyYjRhZGZmNzk2M2Q,
4080000011,14083218679;tgrp=222,4080000011,,sipif-10.9.9.151,sip:10.9.9.151:5060;transport=UDP,sip:10.9.9.201:5060; transport=UDP,
20150611133650330,20150611133650333,20150611133650434,20150611133654993,1,2,,
mediaif-10.2.3.24,0,1,0,10.2.3.24,172.16.110.98,False,0,0,0,221,46688,0,0,0,0,0,0,0,0,0,79,16906,0,0,0,0,0,0,PCMU,1,2,,
mediaif-10.9.9.151,0,1,224,10.9.9.151,10.9.9.201,False,0,0,0,79,16906,0,0,0,0,0,0,0,0,0,221,46688,0,0,0,0,0,0,PCMU,
zone_id=5486 call_id=7f9fbebcacd0-2d78c40c-13c4-65014-153df-34a7a98d-153df zone_name=Jerasoft sip_remote_addr=sip:46.4.63.204:5060;
transport=UDP inviting_ts=1434055010 response_ts=1434055010 failure_reason=300,,,,1,1,64193,217,0,0,0,0,0,0.810000,2.060000,3.750000,
7.060000,5,50,100,0,0,0,62,64,65,93,93,92,93,93,93,4.200000,4.200000,4.200000,0,0,0,0,0,0,0,0,
G.711 u-law/PLC,1,2,22190,79,0,0,0,0,0,2.630000,
4.250000,16.379999,17.940001,5,50,100,0,0,0,65,65,65,93,93,92,93,93,93,4.200000,4.200000,4.200000,0,0,0,0,0,0,0,0,
G.711 A-law/PLC,1,2,64193,217,0,0,0,0,0,0.810000,2.060000,3.750000,7.060000,5,50,100,0,0,0,62,64,65,93,93,92,93,93,93,
4.200000,4.200000,4.200000,0,0,0,0,0,0,0,0,G.711 u-law/PLC,1,1,22190,79,0,0,0,0,0,2.630000,4.250000,16.379999,
17.940001,5,50,100,0,0,0,65,65,65,93,93,92,93,93,93,4.200000,4.200000,4.200000,0,0,0,0,0,0,0,0,G.711 A-law/PLC,0.217

External routing​

External routing in Cataleya Orchid One is based on RFC 4904. A call is redirected to the destination based on the tgrp parameter in the Contact header of the received SIP 3XX response.

In order to establish the integration log into the Orchid One CMS Web interface and perform the following steps.

Modify SIP interface​

Configure the SIP interface according to the screenshot below:

SIP Interface

NameDescription
NameName of the interface
IP InterfaceIP address of the SIP interface
PortListening port
TransportTransport protocol
SharedIs interface shared by more than one zone

Create customer zone​

In order to create a customer zone for the external routing server, you need to pay attention to some of the field, they are listed below.

Step 1 – General​

Zone 1

NameDescription
NameName of the customer zone
CustomerAn identifier for the customer represented by the zone (if there are multiple zones for the same customer, all of the zones may have the same ID)
Trunk Group IDTrunk Group ID
Trunk Group TypeSet to "RFC4904Egress"

Step 2 – Signaling​

Zone 2

NameDescription
SIP ProfileSelect SIP profile to apply
SIP InterfaceSIP interface for this zone

Step 6 – Remote Peers​

Zone 6