You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

We are delighted that you've chosen JeraSoft VoIP Carrier Suite for your business. Since your JeraSoft VCS installation is now complete there are few important steps that we strongly recommend you perform before using the system.  Safety of your business is very important for us. Please follow this recommendations carefully. 

Firewall Configuration

The first step is configuring the firewall (iptables). Configure it according to your network policy and include the following requirements:

  1. Ports tcp/22, tcp/80 and tcp/443 should be open from trusted IP addresses only (include 5.9.58.250/32 and 176.9.51.38/32 for support purposes)
  2. Ports udp/1812, udp/1813 and udp/5060 should be open from your switches/gateways IP addresses
  3. Ports tcp/22, tcp/5432 and tcp/6379 should be open between billing servers if you have more than one

Date & Time Configuration

It is strongly recommended to configure NTPd synchronisation of date and time for all used servers.

Time zone for JeraSoft VCS servers should be set to "UTC" all the time. If you need to get data in other time zone, use JeraSoft VCS settings to configure it.

SSH Access

For security purposes we recommend that you disable login by "root" user. To access the server use individual accounts for each person with sudo allowed when needed.

For support and upgrades by JeraSoft Team, keep separate "jerasupport" account with strong password. We recommend that you disable it when not needed.

Web Access

It is recommended that you disable account "admin" in the web interface. To access the system create individual accounts for each person with correct permissions levels.

For support and upgrades by JeraSoft Team, keep separate "jerasupport" account with strong password. We recommend that you disable it when not needed.

Monitoring Configuration

To watch for critical events on the billing platform we recommend that you set up some monitoring software (e.g. zabbix or nagios). The following factors should be monitored:

  1. Current Load (load average more than 75% of number of CPU cores is critical)
  2. HTTPS (site accessibility)
  3. Disk space (less than 30% of amount is critical)
  4. Swap Usage (more than 10% is critical)
  5. RAID Array State (consistency of the array for your adaptor)
  6. Running Processes when using RADIUS (vcs-bbradiusd at least 3 processes running)
  7. Running Processes when using SIP Redirect (vcs-bbsipd at least 3 processes running)

After these initial configuration steps it is time to move on to the integration stage with your switches and/or gateways. To perform this procedure please consult IM and Support Team.

VCS First Steps

Aside from server configuration there are a few steps to be completed in the VCS. They will be covered in detail during general training and include:

  • Company Information – fill your company profile with logo and other related information which will be displayed on invoices. To perform this step please access Management – Resellers section;
  • Currencies Setup – if you plan to use more than one currency please access Configuration – Currencies section and add more currencies;

  • General Parameters Check – please access Configuration - Settings section of your VCS and check default system parameters such as date format, timezone, etc. and change them as needed. You can read more about settings in the Settings section of this Guide.

After this you may proceed to fill VCS with relevant information for customers, providers, rate tables and start using the system. This manual is intended to help you use any section and explain every single part of the system.

  • No labels