Versions Compared

Old Version 6

changes.mady.by.user Anastasiia Kovalinas

Saved on

compared with

New Version 7

changes.mady.by.user Anastasiia Kovalinas

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

To create a new rate for a target code, you need to click Add Rate and the following fields will appear:  

Extra Fields
Specify a tag for the respective rates. If it's not applicable, assign a (@) tag as default.End DateAdditional information about current rate.
FieldDescription
Src CodeRate TableSpecify Indicate a source code rate table for a new rate
Dst Code

Indicate a destination code for a new rate

Dst Code NameName of a destination code group
Src Code
Specify a source code for a new rate.

You can add a code to the already chosen code deck while creating a new rate. To do it, while indicating a new one for a rule, click on the plus Image Removed icon next to the respective code (see the screenshot below). The plus icon will be visible if there is a code deck specified previously

Image Removed
Panel
borderColor#ffffb3
bgColor#ffffb3
borderWidth2px

(warning)   Attention

Please note that rates with Src Codes are not used when termination tariffs are chosen for Dynamic Routing. This functionality is going to be reworked in the upcoming releases.


Src Code NameIndicate a source code name in case a source code is not specified (available if a code deck is attached). If an Src Code Name is specified, the Src Code field becomes disabled and vice versa.
Dst Code

Indicate a destination code for a new rate.

Dst Code NameName of a destination code group (available if a code deck is attached)
RatePrice per unit of a service. Here you can see changes (how current rate differs from previously effective on) by clicking the up/down arrows
Effective DateRate start date (newest available rate for a particular destination)
Interval

Tariffication interval. This parameter is used when Min Volume expires. For instance, if call time is 26 seconds, Min Volume is 25, and Interval is 8, the client will pay for 33 seconds

Min VolumeMinMinimal time of call that will be tariffed.
For example, if total call time was 20 seconds and Min Volume is 30, the client will pay for 30 seconds of the call.
Int

Grace Volume

Tariffication interval.
This parameter is used when Min Time expires.

For instance, if call time is 26 seconds, Min is 25, and Int is 8, the client will pay for 33 seconds

Additional parameters are stored under the gray downwards arrow Image Removed icon.

Time interval that will not be tariffed (free time). For instance, if you specified 5 sec as Grace Volume , all calls with duration up to 5 seconds (including calls with session time of 5 seconds) will be free of charge.

Setup Fee

Setup fee (charged when event duration is longer than 0 seconds)
Effective DateRate start date (newest available rate for a particular destination)

End Date

After a specified date, the target rate will not be used
ServicesSelect a service for a current rate (calls, SMSs, data)
  • Tag

Policy

This option allows selecting a rate type for a code: regular rate or an additive (extra) rate:

    • regular rate - this policy signifies a usual rate definition for the event;
    • additive (extra) rate - this policy signifies that this rate will be added to a regular rate for the event. 

During billing, the system takes one regular rate and all additive (extra) rates that are appropriate for the call.  Please note, a regular/additive rate table will be determined by accessible dynamic and static tags used for the call. 

Time Profile

Time profile that will be used for a current rate. For example, business time, non-business time, weekends, etc.

Tag

After a specified date, the target rate will not be used.
  • Setup Fee
Setup fee (charged when event duration is longer than 0 seconds).
  • Grace Volume

Time interval that will not be tariffed (free time). 

For instance, if you specified 5 sec as Grace Time , all calls with duration up to 5 seconds (including calls with session time of 5 seconds) will be free of charge.

Specify a tag for the respective rates. If it's not applicable, assign a (@) tag as default

Notes

Additional information about current rate

Number Length

Specify a minimum and maximum length of destination number.

For example, if you have a rate of 3 USD for 123 Dst Code with indicated number length from 6 to 9, and another rate of 5 USD for the same 123 Dst Code without specified number length, all calls with a Dst Number between 6 and 9 digits will be billed by 3 USD , otherwise, by 5 USD.

  • Notes

Screenshot: Adding a New Rate

Image Added

After you finish filling in all the fields, click ОК.Also, you can export the rates quickly by clicking the Export Filtered button or opening the Export tab. 

Mass Rate Edit

It's possible to make a mass update of the rates filtered by the rate table by clicking on Mass Edit for the . The drop-down menu to will appear. Then, where you need to fill in the fields according to your needs. There are four six general parameters that can be applied to a field:

  • preserve - the default configuration that saves the rate not edited. Leave this parameter unchanged if required;
  • set to - it allows to edit rates, for example, specify the same effective date for all rates at once, regardless of previous configurations;
  • inc for - here you can indicate how the original value increased;
  • dec for - here you can indicate how the original value decreased;
  • absolute - take the entered value as an absolute one;
  • relatve - take the entered value as a relative one.

The list of mass edit fields is as follows:

Screenshot: Mass Edit button

Image RemovedImage Added 


FieldDescription
StatusChange rates statuses. Available options: preserve, set to
Rate

Change rates values. Available options: preserve, set to, inc for, dec for, absolute, relative. You can increase or decrease the value either by fixed number or percent. To increase or decrease by percent, enter % sign after the desired number.

Panel
borderColor#FFBABA
bgColor#FFBABA
borderWidth2px
borderStylesolid

Warning

Do not enter non-numeric symbols.


Setup FeeSF

Change setup fee values. Available options: preserve, set to, inc for, dec for, absolute, relative. You can increase or decrease the value either by fixed number or percent. To increase or decrease by percent, enter % sign after the desired number.

Panel
borderColor#FFBABA
bgColor#FFBABA
borderWidth2px
borderStylesolid

Warning

Do not enter non-numeric symbols.


TagChange rates tags. Available options: preserve, set to
Min. VolumeChange minimal volume values. Available options: preserve, set to
IntervalChange tariffication interval values. Available options: preserve, set to
Grace VolumeChange grace volume values. Available options: preserve, set to
Effective DateChange rates start date values. Available options: preserve, set to
End DateChange rates end date values. Available options: preserve, set to
Time ProfileChange rates profiles. Available options: preserve, set to
NotesChange rates notes. Available options: preserve, set to
Number Length MinChange minimum length of destination numbers. Available options: preserve, set to
Number Length MaxChange maximum length of destination numbers. Available options: preserve, set to

...

Use the Advanced Search drop-down menu (see screenshot) by clicking on a red blue downwards arrow Image Removed icon arrow icon in the top right corner of the tab. To open additional settings, click the Advanced button. 

Screenshot: Rates tab search settings

Number Length
FieldDescription
Rate TableFilter rates by a selected rate table
Src/Dst Code/NameSearch by the title or code
Policy

Search by the policy of the rate:

  • regular
  • additive
Status

Search by the state of the rate:

  • active
  • stashed (not confirmed). This state means that the rate is not used for the billing or routing process.
State

Search by the period of a rate during which the rate is active, expired, etc., as compared to the date specified in the next field. The following states are available to choose from a drop-down list:

  • current/future - includes current and future rates
  • current on - the search includes rates that are active for a specified date
  • old future for - the search rates that are expired for future rates compared with a specified date
  • future past for - the future rates compared with search rates that are expired for a specified date
  • current/new - includes current and future rates
  • all - includes all rates
Code/NameTime ProfileSearch by the title or code time profile of the rate
TagSearch by an assigned tag
ServicesSearch by the service, for which rates will work
RateSearch by the rate, the price interval could be specified
Setup FeeImported FileSearch by the title of an imported file, choose a file from the drop-down list of all available. If the list is empty, there are no imported files. setup fee of the rate, the interval could be specified
End DateSearch by the expiration date of the rate
Notification

Search by rate notifications to the clients:

  • Sent
  • Not sent
Prev Diff Difference Status

Search by the cost changes of the current rate from previous. The following types are available to choose from a drop-down list:

  • Decreased
  • Increased
  • Not changed
  • New
Next Diff Status

Search by the state cost changes of the next rate from current. The following types are available to choose from a drop-down list:

  • active
  • stashed (not confirmed). This state means that the rate is not used for the billing or routing process.
RateSearch by the rate, the price interval could be specified
  • Decreased
  • Increased
  • Not changed
  • New
Import FileSetup FeeSearch by the setup fee of the rate, the interval could be specifiedEnd DateSearch by the expiration date of the rate title of an imported file, choose a file from the drop-down list of all available. If the list is empty, there are no imported files.
Min VolumeSearch by the minimal volume of event that will be tariffed
IntervalSearch by the tariffication intervalProfileSearch by the time profile of the rate
Grace VolumeSearch by the interval of the free timeSearch by the length of the destination number


Panel
borderColor#ffffb3
bgColor#ffffb3
borderWidth2px

(warning)   Attention

When you filter rates by the state (for example, current/newfuture, future for, current on), the stashed (not-confirmed) rates will not show up in the search results. To include these rates, choose all from the drop-down list.

...